On this page
Athéna Resident agent on a Raspberry Pi 5

Proof — The greenhouse

The real state of the buses and the database when this page is built.

Proof recalculated on 2026-11-21

What is shown

The state of the buses enabled in config.txt, the I2C and SPI nodes present, and the list of recognised 1-Wire sensors. If there are none, the page says so.

What is not proven

This is the important point of this project: nothing physical is connected yet. The readings shown elsewhere on this site come from a demonstration database, and that is written down.

What will change

As soon as a sensor answers, this page will show the real record, the date of the first sample, and the continuity of measurements. The proof manifest is already written for it.

Counters

Countersvaleur
Mesures de démonstration en base120

Commands

Bus activés dans config.txt

grep -E 'dtparam|dtoverlay' /boot/firmware/config.txt
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
dtparam=audio=on
dtoverlay=vc4-kms-v3d
dtoverlay=w1-gpio
dtoverlay=dwc2,dr_mode=host
dtoverlay=nospi10

Nœuds I2C et SPI

ls /dev/i2c-* /dev/spidev* 2>/dev/null
/dev/spidev0.0
/dev/spidev0.1

code de retour 2

Sondes 1-Wire

cat /sys/bus/w1/devices/w1_bus_master1/w1_master_slaves 2>/dev/null || echo "aucune sonde"
00-b93000000000
00-793000000000

Images

Le tableau de bord que le kit produit (données de démonstration)
Le tableau de bord que le kit produit (données de démonstration)

What is not proven